EnergoAqua Industry, EAI, consists of three parts, the reflective plate, insulation and the water carrying pipes. CE marked and manufactured in accordance with EN 14037.
The panel compromises of a 0.9 mm aluminium plate which is cold pressed into optimal shape, the insulation consists of 25 mm thick mineral wool topped with plastic covered paper. The pipes are made from steel with diameter Ø 35/32 mm. Maximum working pressure 6 Bar.
Design and Function
The surface plate encapsulates the steel pipes maximising the contact surface leading to a highly efficient radiant panel.
The warm water which circulates through the pipes conducts heat to the surface plate, warming the underside of the panel. The increased temperature of the panel enables radiant heat being emitted to cooler surfaces in the room.
Width: EAI is available in two different widths 615 mm (2 pipes) or 900 mm (3 pipes).
Length: EAI can be made to any length in 500 mm increments up to 6 m per panel. Several panels can be inter-connected to a maximum length of 125 m.
Connections: Panel connections are Ø 35 x 1.5 mm via smooth straight pipe ends.
Inter-connections: A panel run, longer than 6 m, can be made by combining a connection panel and an end panel together with a number of intermediate panels. All panels are jointed by using Ø 35 mm press-fittings. Panels can be supplied in different versions to accommodate for serial or parallel connections to manage flow rates and pressure drops.
Suspension: EAI should be installed free hanging from the ceiling using the included hangers.
Further information regarding capacities, pressure drops, flow rates and connection options along with accessories and controls can be obtained from our technical brochure.
Download the product brochure
Download the technical manual